Humvee Pinball Hitch and 24v To 12V Military Truck To Civilian Trailer Light Converter Cable

Now: $425.00
(You save )
(No reviews yet) Write a Review


This Listing is for ONE Humvee Pinball 2'' Drop hitch with a 24v To 12V Military Truck To Civilian Trailer Light Converter Cable. 

This hitch is specifically designed and built in the US for the US military HMMWV & HUMVEE


It is used in conjunction with the standard pintle hitch that is already on the vehicle.


With this design, you can choose to pull a pintle style trailer at the proper height for that style trailer or you can use the receiver for a ball hitch which is also at the proper height for a ball hitch type trailer.


Features For Converter Cable 

• 12 Volts @ 20 Amps (240 watts lighting power)

• Surge Suppression

• Overload Protection

• Automatic Reset

• Water-proof

• Plug & Play (no wire cutting or splicing)


• 3 Lever or Push Button Light Switch

• "Service Drive” and “Park” modes

How It Works

Takes power from the tail light circuit, wire #21, and converts it to 12 volts. That 12 volt power is fed into relays that are triggered by wires# 22-460 and 22-461, the left and right stop/turn circuits. The 12 volts from the power converter and relays are fed to a civilian trailer connector. The tractor versions have additional relays that provide separate turn and stop lighting circuits for semi trailers.

A note about power

The adapter will supply a total of 20 amps (240 watts) for trailer lighting. The standard 12 volt 1157 taillight bulb draws 26 watts for stop/turn and 8 watts for tail. A typical trailer setup of two stop/turn/tail light bulbs (one per side) with running lights on and brakes applied will use 68 watts, leaving 172 watts for marker lights (they tend to be 8 watts or less, so at least enough power for 20 of them). Or a ridiculous number of LED lamps. A load of greater than 240 watts will overload the converter and cause it to shutdown. The converter will auto-reset once the overload is cleared.

Detail of Standard Versions

Standard Converter Cable

The Standard Converter Cable has a 7-Way RV style trailer connector mounted in a waterproof box and a 6’ 12 pin NATO style cable that plugs directly into any standard military truck’s trailer socket.

Additional Details


Related Products

Customers Also Viewed